Recently while trawling through the archives over at the Mills Archive Trust we came across this amazing photograph!
This is a picture of Outwood Smock Mill probably some time in the 1940’s to the 1950’s.
Photo courtesy of Mills Archive Trust
We know that Smock Mill at Outwood blew down in a gale in November 1960 – you can find out more about the Outwood Smock Mill by clicking here
Records show that Outwood Smock Mill was the tallest smock ever built and it was constructed around 1792 by Ezekiel Budgen, who was the Uncle of the then Miller of the Post Mill at Outwood one William Budgen. William was the Grandson of the Builder of Outwood Mill, Thomas Budgen.
As you can see from the picture the smock mill was in a bad way and after it blew down much of the timber was “rescued” by the locals and there are some sheds and summerhouses in the village that contain wood from the Smock Mill. In fact the garage on the current Outwood Post Mill site and the Stable Barn attached to the property next door are also constructed from timbers from the old Smock Mill.
Its a sad loss and of course if it were standing today it wouldn’t have been left to blow down in a gale.
If you have any pictures or stories about Outwood Post Mill or the Smock Mill at Outwood, then we would be delighted to hear from you.
We’ve just received this very interesting story and some images from Leslie Fuller in France.
According to the photographs sent to us by Leslie, his Great Grandfather, one Frank Fuller was a millwright in the latter part of the 19th Century and was certainly known to either the Jupp Brothers (William & Stanley) or even the Thomas brothers (Raymond & Gerald).
Here is an image of Frank Fuller, this was taken in 1876 and would make Frank around 19 years old at the time:-
As you can see from the photograph it appears that the man on the right of the image is working on a gear wheel for either a water mill or a windmill. One would suspect that this might be the man under whom Frank Fuller trained as a Millwright.
The photograph was sent to Leslie around 1986 by Raymond Thomas as the inscription on the rear shows.
Whats even more interesting is that Raymond Thomas indicated to Leslie that Frank Fuller made a donation of some his Millwrights Tools to the Windmill and Raymond confirmed at one time that there was an exhibition of these tools within the windmill.
Having looked through some recent photographs that we took recently at the windmill it appears that there are tools all over the windmill and some of these may indeed have belonged to Frank Fuller as Raymond Thomas indicated.
Here are some images of both the Roundhouse and the Stone floor showing millwrights tools hung up in various places.
The image above shows a row of “Mill Bills” that hang across one of the beams on the Stone Floor of Outwood Mill, these tools were used to “dress” the Mill Stones (Dressing the stones meant recutting the grooves in the Bed Stone that enabled the ground meal to exit the stones).
The image above shows some saws that hang in the Roundhouse (the lower part of the windmill), these do appear to herald from the late Victorian period and are therefore contemporary with Frank Fullers time as a Millwright.
What’s even more interesting is the photo below:-
This image shows Franks examination results for the exam he sat in Machine Construction and Drawing. The certificate is dated 6th May 1876 and shows Frank to be 19 at that time. This then means Frank was born in 1857 and I feel sure he lived to a ripe old age.
Certainly Frank Fullers memory and perhaps his workmanship lives on in Outwood Mill and we at the mill are indebted to Franks Great Grandson, Leslie for sharing this wonderful story with us and allowing us to publish these images.
If we find out anything more about Frank we’ll be sure to put it on the site here and if you are reading this and you have any further information about this story or any other history in connection to Outwood Mill we’d be delighted to hear from you.
Recently we had the renowned millwrights Owlsworth IJP come and inspect the mill.
Although the mill is in good order generally we had an inkling that the current set of sweeps are in need of some attention due to their age.
The current sweeps were last repaired some 10 years ago and having withstood wind and weather for that period of time has taken its toll, as expected and one of the sweep arms in particular is fairly rotten and could present a danger to visitors.
Whilst he was here, Neil from Owlsworth IJP took considerable time to look at every aspect of the mill and found some other areas that need attention such as some of the planking on the side of the mill and of course the mill stones.
Although Outwood Mill is legendary amongst the millwright community, Neil had never been in the mill (he’d driven past it a few times). He said it was a real pleasure to see inside and get a feel for our lovely old windmill.
We are now also looking for two pairs of mill stones to replace the old stones that in Outwood Mill at the moment. Whilst Neil was here we established that the Forward pair are likely to be Derby Peak Stone and the rear pair look like a pair of Burr Stones, possibly French (though he can’t be sure).
We are now waiting on Neils full report and once we have this then fundraising and grant applications will begin in earnest. Once we have the report in our hands we’ll bring you another update.